DJI Phantom 4 RTK Combo - Special Order

DJI Phantom 4 RTK Combo - Special Order

SKU: CP.TP.00000232.02


The ultimate mapping solution for enterprise. 


The Phantom 4 RTK is a mapping drone capable of seriously accurate data collection. 


It is compatible with DJI Terra - the new 3D mapping software from DJI. 


Most people are already familiar with the Phantom range of drones. The low barrier to entry makes the Phantom 4 RTK version even more attractive than existing solutions. 


There's also a lower price point, new dedicated app and existing ecosystem of accessories.


In addition - the Phantom 4 RTK supports DJI's Mobile SDK - meaning functions are open to further automation and customisation through a mobile device. 


Phantom 4 RTK Accuracy

The DJI Phantom 4 RTK can produce extremely accurate data.


This custom built quadcopter is crafted from the ground up with accuracy in mind.


This results in:

  • 1cm+1ppm RTK Horizontal Positioning Accuracy
  • 1.5cm+1ppm RTK Vertical Positioning Accuracy
  • 5cm Absolute Horizontal Accuracy of Photogrammetric Models


This is on par with some of the most advanced equipment available, but in a much easier to use, lower priced, compact and more reliable package.


The new technology in the Phantom 4 RTK means that fewer ground points are required to achieve the same high level of accuracy.


How is the RTK used on the Phantom 4 RTK?

The new RTK module, sitting on top of the existing Phantom 4 quadcopter body, collects centimeter-level positioning data in real-time.


Extremely accurate positional data is then added to image metadata.


An additional redundant GNSS module ensures that the Phantom 4 RTK will remain stable in flight regardless of the conditions.


The combination of these modules make for accurate data collection for a range of mapping, surveying or inspection workflows.


If you need more flexibility, the Phantom 4 RTK can also be used in conjunction with the D-RTK 2 Mobile Station, NTRIP (Network Transport of RTCM via Internet Protocol) using a 4G dongle or WiFi hotspot, or store the satellite observation data to be used for Post Processed Kinematics (PPK).


New TimeSync feature on Phantom 4 RTK

DJI have created a new TimeSync system.


The purpose of this system is to make sure that all users can take full advantage of the Phantom 4 RTK's power.


It continually aligns the flight controller, camera and RTK module during flight.


Each photo that is taken uses the most accurate fixed positioning data at the center of the 1" CMOS sensor on the Phantom 4 RTK.


Phantom 4 RTK Image Capture

The camera is the same as the Phantom 4 Pro, a 1" CMOS sensor which captures incredible detail.


This high resolution camera allows the Phantom 4 RTK to achieve a Ground Sample Distance (GSD) of 2.74 cm at 100 meters flight altitude.


DJI rigorously calibrate each camera before dispatch, to ensure that your Phantom 4 RTK will collect only the most accurate images.


The unique distortion parameters for the individual camera or image are also saved into image metadata - allowing you to take accuracy even further in post processing.


New Flight Planning Application for Phantom 4 RTK

In addition to the new hardware, there's a new GS RTK app being released.


This gives pilots intelligent control over their Phantom 4 RTK unit in two different modes, Photogrammetry and Waypoint Flight, in addition to the usual flight modes.


These planning functions let you select a flight path, overlap rate, camera parameters, speed, altitude and more.


This gives you complete control to ensure you're capturing the most accurate data for your workflow at any given time.


The automation makes even the most complex of surveying missions simple.


Other features of the app include support for directly loading KML area files, a new shutter priority mode for consistent exposures and strong wind alarms to prevent the risk of reduced data quality during a mission.


Changes to Phantom 4 RTK Remote Control

The remote controller for the Phantom 4 RTK has also had some additional features.


It's based on the Phantom 4 Pro+ remote with a built in screen.


In addition however, the following improvements have been made:

  • Pre-installed GS RTK application.
  • Built-in Micro-SD card slot.
  • Built-in speaker.
  • Hot-swappable batteries.
  • Can be used to connect to the internet using a 4G dongle.


DJI Terra

To take your missions further, the Phantom 4 RTK is compatible with DJI Terra - DJI's new mapping solution.


The photos captured from your DJI drone can now be transformed into digital 3D models or maps.


The models created in DJI Terra can be used in a huge array of applications, including public safety, construction, infrastructure, agriculture and media.


DJI Terra allows you to plan flights prior to your operations, collect and centralise drone data, create 3D maps from selected areas and carry out valuable data analysis.


There are two licences available for DJI Terra - Advanced and Pro. The Pro version (with extra features, such as 3D Reconstruction and  3D Mission Planning) is compatible with the Phantom 4 RTK. You can purchase the Terra licence on its own, or you can buy one of two combo bundles - one with the Phantom 4 RTK and DJI Terra, and another with these two items plus the D-RTK 2 Mobile Station.

  • Tech Specs

    Phantom 4 RTK Specifications

    Please see the full specs of the DJI Phantom 4 Pro RTK system below.


    Weight with Battery and Propellers Fitted

    1391 g

    Max Service Ceiling Above Sea Level

    6000 m
    (19685 ft)

    Max Ascent Speed

    6 m/s (automatic flight)
    5 m/s (manual control)

    Max Descent Speed

    3 m/s

    Max Speed

    31 mph (50 kph) (P-mode)
    36 mph (58 kph) (A-mode)

    Max Flight Time

    Approximately 30 minutes

    Operating Temperature

    0° to 40° C
    (32° to 104° F)

    Operating Frequency

    2.400 GHz to 2.483 GHz (Europe, Japan, Korea)
    5.725 GHz to 5.850 GHz (United States, China)


    2.4 GHz
    CE (Europe) / MIC (Japan) / KCC (Korea): < 20 dBm

    5.8 GHz
    FCC (United States) / SRRC (Mainland China) / NCC (Taiwan, China): < 26 dBm

    Hover Accuracy Range

    RTK enabled and functioning properly:
    Vertical: ±0.1 m; Horizontal: ±0.1 m

    RTK disabled:
    Vertical: ±0.1 m (with vision positioning); ±0.5 m (with GNSS positioning)
    Horizontal: ±0.3 m (with vision positioning); ±1.5 m (with GNSS positioning)

    Image Position Offset

    The position of the camera center is relative to the phase center of the onboard D-RTK antenna under the aircraft body’s axis: (36, 0, and 192 mm) already applied to the image coordinates in Exif data. The positive x, y, and z axes of the aircraft body point to the forward, rightward, and downward of the aircraft, respectively.


    Single-Frequency High-Sensitivity GNSS

    GPS + BeiDou + Galileo* (Asia); GPS + GLONASS + Galileo* (other regions)

    Multi-Frequency Multi-System High-Precision RTK GNSS

    Frequency Used
    GPS: L1/L2; GLONASS: L1/L2; BeiDou: B1/B2; Galileo*: E1/E5
    First-Fixed Time: < 50 s
    Positioning Accuracy: Vertical 1.5 cm + 1 ppm (RMS); Horizontal 1 cm + 1 ppm (RMS)
    1 ppm indicates an error with a 1 mm increase over 1 km of movement
    Velocity Accuracy: 0.03 m/s


    Mapping Accuracy

    Mapping accuracy meets the requirements of the ASPRS Accuracy Standards for Digital Orthophotos Class III.

    The actual accuracy depends on surrounding lighting and patterns, aircraft altitude, mapping software used, and other factors when shooting.

    Ground Sample Distance (GSD)

    (H/36.5) cm/pixel, H indicates the aircraft altitude relative to the shooting scene (unit: m)

    Acquisition Efficiency

    Max operating area of approx. 1 km2 for a single flight (at an altitude of 182 m, i.e., GSD is approx. 5 cm/pixel, meeting the requirements of the ASPRS Accuracy Standards for Digital Orthophotos Class III).



    3-axis (pitch, roll, yaw)

    Controllable Range

    Pitch: -90° to +30°

    Max Controllable Angular Speed

    Pitch: 90°/s

    Angular Vibration Range



    Velocity Range

    ≤ 31 mph (50 kph) at 6.6 ft (2 m) above ground with adequate lighting

    Altitude Range

    0 - 10 m
    (0 - 33 ft)

    Operating Range

    0 - 10 m
    (0 - 33 ft)

    Obstacle Sensory Range

    0.7 - 30 m
    (2 - 98 ft)

    Field of View

    Forward/Rear: 60° (horizontal), ±27° (vertical)
    Downward: 70° (front and rear), 50° (left and right)

    Measuring Frequency

    Forward/Rear: 10 Hz
    Downward: 20 Hz

    Operating Environmental Conditions

    Surfaces with clear patterns and adequate lighting (> 15 lux)


    Obstacle Sensory Range

    0.2 - 7 m
    (0.6 - 23 ft )

    Field of View

    70°(Horizontal), ±10°(Vertical)

    Measuring Frequency

    10 Hz

    Operating Environment

    Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)



    1’’ CMOS; Effective pixels: 20M

    Lens Specs

    FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.8 - f/11, auto focus at 1 m - ∞

    ISO Range

    Video: 100 - 3200 (Auto), 100 - 6400 (Manual)
    Photo: 100 - 3200 (Auto), 100 - 12800 (Manual)

    Mechanical Shutter

    8 - 1/2000 s

    Electronic Shutter

    8 - 1/8000 s

    Max Image Size

    4864×3648 (4:3)
    5472×3648 (3:2)

    Still Photography Modes

    Single shot

    Video Recording Modes

    H.264, 4K: 3840×2160 30p

    Photo Format


    Video Format


    Supported File Systems

    FAT32 (≤ 32 GB)
    exFAT (> 32 GB)

    Supported SD Cards

    Max Capacity: 128 GB.
    Write speed ≥15MB/s.
    Class 10 or UHS-1 rating required

    Operating Temperature

    0° to 40° C
    (32° to 104° F)


    Operating Frequency

    2.400 GHz to 2.483 GHz (Europe, Japan, Korea)
    5.725 GHz to 5.850 GHz (United States, China)


    2.4 GHz
    CE / MIC / KCC: < 20 dBm
    5.8 GHz
    FCC / SRRC / NCC: < 26 dBm

    Max Transmission Distance

    FCC / NCC: 4.3 mi (7 km)
    CE / MIC / KCC / SRRC: 3.1 mi (5 km)
    (Unobstructed, free of interference)

    Power Consumption

    16 W (typical value)

    Display Device

    5.5 inch screen
    1000 cd/m2
    Android system
    4G RAM + 16G ROM

    Operating Temperature

    0° to 40° C
    (32° to 104° F)



    5870 mAh


    15.2 V

    Battery Type

    LiPo 4S


    89.2 Wh

    Net Weight

    468 g

    Operating Temperature

    -10° to 40° C
    (14° to 104° F)

    Max Charging Power

    160 W



    17.5 V

    Operating Temperature

    5° to 40° C
    (41° to 104° F)



    4920 mAh


    7.6 V

    Battery Type

    LiPo 2S


    37.39 Wh

    Operating Temperature

    -20° to 40° C
    (-4° to 104° F)


    Input Voltage

    17.3 to 26.2 V

    Output Voltage and Current

    8.7 V, 6 A; 5 V, 2 A

    Operating Temperature

    5° to 40° C
    (41° to 104° F)



    17.4 V

    Rated Power

    160 W

© 2019 West Wales Drone Services Photography & Videography

T's & C's


  • Instagram
  • Facebook Social Icon
  • YouTube
  • LinkedIn Social Icon